QC250 Quadricopter – Introduction

by luca
7 comments

I started the Quick and Cheap Quadricopter (QC250) project after having taken up a friend’s challenge: build a quadcopter with less than 100 euros (excluding the radio).

I decided to build a 250 class (25cm is the distance between two opposite motors) quadcopter. It’s a middle size, perfect both for acrobatic flies and for carrying small cameras for aereal shots and/or FPV.

I’ll post some video tutorials that will show, step by step, how to build the multicopter… here’s the first one, with the introduction:

[youtube id=”FMc8OtB1B6I” width=”600″ height=”350″]

Required components

I chose to buy everything from one webshop (Banggood) that also offers free shipping. The required components are:

[checklist]

  • Diatone DIY FPV250 frame (link)
  • DYS BE1806 motors (link)
  • 4 RCX SimonK 10A ESCs (link)
  • an OpenPilot CC3D flight control board (link)
  • its power distribution board (link)
  • ZOP Power 11.1V 1500mA battery (link)
  • an XT60 male connector with wires (link)
  • velcro strip (link)
  • a battery charge monitor (link)

[/checklist]

In addiction to what is listed above, you’ll also need:

[checklist]

  • some spacers (link)
  • some plastic zip ties (link)
  • led strip – optional (link)
  • radio with at least 5 channels (I used my Turnigy 9x)
  • screw drivers, soldering iron, solder, scissors or a cutter…

[/checklist]

Ready to go? In the next days I’ll post the video tutorials with all the instruction to build our QC250!

quad-featured

 

Related Posts

7 comments

Veda Monday March 30th, 2015 - 09:46 AM

Total cost is about 79.33 dollar. That is without the radio. Aren’t there cheaper options that have the radio included?

Reply
luca Monday March 30th, 2015 - 10:31 AM

Hi! Of course there are several RTF (ready-to-fly) products that cost less and also include the radio… but the goal was to build a quadcopter “from sketch” 😉

Reply
Mike Sunday May 31st, 2015 - 10:20 PM

Hi!
Thank you for a great build. Can you tell me where you purchased your propellers?

Reply
luca Monday June 1st, 2015 - 01:46 PM

Hi Mike, from Banggood.

Reply
Mauro Tuesday June 16th, 2015 - 01:47 PM

Ciao Luca,
il quadricottero che hai assemblato è riadattabile ad uno equivalente con una scheda di autopilotaggio tipo quelle basate su ARDUINO? Sono uno sviluppatore software e sarei interessato per mia curiosità personale ad assemblare un drone che sia programmabile anche via software in Java, C, C++, ecc…Purtroppo non riesco a trovare sul web un progetto o un drone kit programmabile basato su arduino o anche su altre piattaforme

Reply
Mauro Tuesday June 16th, 2015 - 01:48 PM

ciao luca, mi sono perso un pezzo della mia domanda…il problema è anche trovare qualcosa di economico

Reply
luca Wednesday June 17th, 2015 - 07:45 PM

Ciao Mauro, assolutamente sì… tieni conto che molte delle flight control board sono basate sul codice di MultiWii, progetto che inizialmente utilizzava un Arduino e i sensori della Wii (da qui il nome). Ho provato il quad di questo tutorial con diverse FCB, sia con Atmega328 (Arduino-based) che con le nuove 32bit (Naze32…) il cui firmware (Baseflight, Cleanflight) è comunque sviluppato in C++ e deriva da MultiWii.

Reply

Leave a Reply to luca Cancel Reply

fourteen + eighteen =