SoftPot and Arduino

I found that Troniqa webshop sells a membrane potentiometer named SoftPot (datasheet): This potentiometer, that is available in lengths of 10 and 20cm, changes its resistance depending on the point on which pressure is applied. The connection to Arduino is very simple and doesn’t differ from what is explained in the official tutorial for a “normal” potentiometer: I connected 5V to pin…

irrighino

Irrighino is a complete watering system, based on Arduino Yun. The main features are: [checklist] a configurable number of solenoid valves an AJAX web interface a weekly schedule manual activation / deactivation [/checklist] Here’s a short video that describes the project: How it works An Arduino Yun – the “brain” of irrighino – is connected to the switch panel…

How to repair an Hubsan H107L X4 quadcopter

Some days ago, my Hubsan H107L X4 miniquad, from Banggood, stopped working: even if I connected a fully-charged battery, it didn’t move or light. Therefore, I ordered from Banggood a flight control board (they call it receiver board) to replace the faulty one: After having opened the quadcopter frame (fixed with three screws) and having unsoldered the old board, I started…

VMware and CDP

The Cisco Discovery Protocol (CDP) is a Cisco proprietary protocol to share information between directly connected network devices. It’s very useful, especially in a complex network, to discover its topology, for example which switch port a server is connected to. In addition to CDP and other proprietary protocols, a IEEE standard protocol exists, the Link Layer Discovery Protocol…

Flashing er9x on a Turnigy 9x transmitter

The Turnigy 9x transmitter (here the Mode2 version on the Hobbyking’s website) is for sure one of the most chosen radio by who start playing with multicopters (and not only with them…). One of the most reported flaws is its software, that doesn’t offer “advanced” features as some more expensive transmitters and that sometimes it’s also difficult to use. For this reason some…